fix(ci): set up Java before Kotlin in PR checks

Add workflow to comment on a PR when it was dequeued

.github/copilot-instructions.md

@@ -11,9 +11,12 @@ The CodeQL Action is used in GitHub Actions workflows to run CodeQL scans using
 
 ## Review instructions
 
-- When wording review comments, be helpful and friendly. Assume that the PR author has written the code with the best of intentions. Word your comments constructively as suggestions for improvements. Do not word suggestions as commands.
+- Prioritise identifying critical issues, such as logic bugs, over comments on documentation or typos.
+- When wording review comments, be helpful and friendly. Assume that the PR author has written the code with the best of intentions. Never word suggestions as commands or using the imperative. Examples of what you should never write: "Preserve that non-fatal behaviour here" or "Please preserve that non-fatal behaviour here".
+- When writing feedback, assume that the PR author is competent and is able to understand whether the point you are making is valid or not, why you are raising it, and how to best address it. While you can suggest how to address a point you are making, don't phrase it as a requirement or assume that it is the only solution.
+- Always word your comments constructively as suggestions for improvements, for example: "It would make sense to ..." or "Could you add ...?" or "Would it make sense to ...?"
 - If you want to comment on a change that you believe will fail a CI check, do not present the CI failure you expect as a fact. Instead, write that you think a change "may" lead to a failure in CI. Suggest that, if such a failure manifests, the changes you are commenting on may be the place responsible for the failure and are worth looking at.
-- If a suggestion you make is suitable for a follow-up, such as a refactoring that doesn't change the behaviour or fixing a typo in a comment, mention that it can be addressed in a later PR rather than blocking this one.
+- If a suggestion you make is suitable for a follow-up, such as a refactoring that doesn't change the behaviour or fixing a typo in a comment, mention that it can be addressed in a later PR rather than blocking this one or prefix your comment with "Minor: ".
 - If a change is a net improvement, for example because it improves on an existing limitation of existing code, do not complain about pre-existing problems that remain. You may comment on them, but you should make it clear that the thing you are commenting on is not new by writing e.g. "Not new in this PR, but [..]" followed by your description of the issue and a suggestion that it could be improved at the same time with e.g. "Consider whether this is worth addressing as part of this PR as well."
 
 ## Generated code
@@ -22,6 +25,16 @@ The main codebase of the CodeQL Action is written in TypeScript and compiled to
 
 GitHub Actions workflows in the `.github/workflows` directory whose filenames start with two underscores (e.g. `__all-platform-bundle.yml`) are automatically generated using the `pr-checks/sync.sh` script from template files in the `pr-checks/checks` directory. Therefore, you do not need to review files in the `.github/workflows` directory that start with two underscores. However, you should review changes to the `pr-checks` directory as well as workflows in the `.github/workflows` directory that do not start with underscores.
 
+## Feature flags
+
+Some functionality in the code may be gated behind feature flags, which are controlled server-side. If the functionality that is gated behind them is user-facing, then this should be documented in a change note at the time that the gated functionality is added. See `CHANGELOG.md` for existing notes that mention "experimental" for examples. These typically include information about when users may expect to see the feature rolled out.
+
+When a feature flag that gates some functionality is removed, this does not need to be documented in a change note since the feature is already rolled out and the notes for the release which introduced the feature already describe it. The only exception is functionality which will start having an effect on GHES as a result of the feature flag removal:
+
+- Most functionality gated behind feature flags does not affect GHES.
+- We can make functionality available on GHES by setting `defaultValue` to `true` first and waiting for this to have had an effect on GHES. No change note is needed if a feature flag is removed where `defaultValue` was `true`.
+- When removing a feature flag where `defaultValue` was `false` and the functionality starts to affect GHES, a change note may be appropriate.
+
 ## Release process
 
 Changes that are merged to the `main` branch are not used in production straight away. Instead, changes from `main` must first be released using the release process, which has to be manually triggered by a staff member. Therefore, it is possible for further changes to be made to the code after some changes have been merged to `main` but before they are released. Once the release process automation is started, a series of PRs are automatically generated:

.github/workflows/__all-platform-bundle.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: all-platform-bundle-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: all-platform-bundle-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   all-platform-bundle:
     strategy:
@@ -79,6 +89,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__analysis-kinds.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: analysis-kinds-${{github.ref}}
+  group: analysis-kinds-${{github.ref}}-${{inputs.java-version}}
 jobs:
   analysis-kinds:
     strategy:
@@ -68,6 +78,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -87,7 +102,7 @@ jobs:
           post-processed-sarif-path: '${{ runner.temp }}/post-processed'
 
       - name: Upload SARIF files
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: |
             analysis-kinds-${{ matrix.os }}-${{ matrix.version }}-${{ matrix.analysis-kinds }}
@@ -95,7 +110,7 @@ jobs:
           retention-days: 7
 
       - name: Upload post-processed SARIF
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: |
             post-processed-${{ matrix.os }}-${{ matrix.version }}-${{ matrix.analysis-kinds }}

.github/workflows/__analyze-ref-input.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: analyze-ref-input-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: analyze-ref-input-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   analyze-ref-input:
     strategy:
@@ -75,6 +85,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__autobuild-action.yml

@@ -25,6 +25,11 @@ on:
         description: The version of .NET to install
         required: false
         default: 9.x
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -32,12 +37,17 @@ on:
         description: The version of .NET to install
         required: false
         default: 9.x
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: autobuild-action-${{github.ref}}-${{inputs.dotnet-version}}
+  group: autobuild-action-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.java-version}}
 jobs:
   autobuild-action:
     strategy:
@@ -64,6 +74,11 @@ jobs:
         uses: actions/setup-dotnet@a98b56852c35b8e3190ac28c8c2271da59106c68 # v6.0.0
         with:
           dotnet-version: ${{ inputs.dotnet-version || '9.x' }}
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__autobuild-direct-tracing-with-working-dir.yml

@@ -63,7 +63,7 @@ jobs:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Install Java
-        uses: actions/setup-java@de7274f081f381c8f8158605e0321c36c376e2e6 # v6.0.1
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
         with:
           java-version: ${{ inputs.java-version || '17' }}
           distribution: temurin

.github/workflows/__autobuild-working-dir.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: autobuild-working-dir-${{github.ref}}
+  group: autobuild-working-dir-${{github.ref}}-${{inputs.java-version}}
 jobs:
   autobuild-working-dir:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__build-mode-autobuild.yml

@@ -63,7 +63,7 @@ jobs:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Install Java
-        uses: actions/setup-java@de7274f081f381c8f8158605e0321c36c376e2e6 # v6.0.1
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
         with:
           java-version: ${{ inputs.java-version || '17' }}
           distribution: temurin

.github/workflows/__build-mode-manual.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: build-mode-manual-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: build-mode-manual-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   build-mode-manual:
     strategy:
@@ -75,6 +85,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__build-mode-none.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: build-mode-none-${{github.ref}}
+  group: build-mode-none-${{github.ref}}-${{inputs.java-version}}
 jobs:
   build-mode-none:
     strategy:
@@ -48,6 +58,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__build-mode-rollback.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: build-mode-rollback-${{github.ref}}
+  group: build-mode-rollback-${{github.ref}}-${{inputs.java-version}}
 jobs:
   build-mode-rollback:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__bundle-from-nightly.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: bundle-from-nightly-${{github.ref}}
+  group: bundle-from-nightly-${{github.ref}}-${{inputs.java-version}}
 jobs:
   bundle-from-nightly:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__bundle-from-toolcache.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: bundle-from-toolcache-${{github.ref}}
+  group: bundle-from-toolcache-${{github.ref}}-${{inputs.java-version}}
 jobs:
   bundle-from-toolcache:
     strategy:
@@ -46,6 +56,20 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
+      - name: Install Node.js
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
+        with:
+          node-version: 20.x
+          cache: npm
+      - name: Install newer npm
+        run: npm install -g npm@11.19.1
+      - name: Install dependencies
+        run: npm ci
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -53,31 +77,20 @@ jobs:
           version: ${{ matrix.version }}
           use-all-platform-bundle: 'false'
           setup-kotlin: 'true'
-      - name: Install @actions/tool-cache
-        run: npm install @actions/tool-cache@3
       - name: Check toolcache contains CodeQL
         continue-on-error: true
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-        with:
-          script: |
-            const toolcache = require('@actions/tool-cache');
-            const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-            if (allCodeqlVersions.length === 0) {
-              throw new Error(`CodeQL could not be found in the toolcache`);
-            }
+        run: |
+          cd ./../action
+          npx tsx ./pr-checks/toolcache.ts installed
+
       - id: setup-codeql
         uses: ./../action/setup-codeql
         with:
           tools: ${{ steps.prepare-test.outputs.tools-url }}
+
       - name: Check CodeQL is installed within the toolcache
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-        with:
-          script: |
-            const toolcache = require('@actions/tool-cache');
-            const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-            console.log(`Found CodeQL versions: ${allCodeqlVersions}`);
-            if (allCodeqlVersions.length === 0) {
-              throw new Error('CodeQL not found in toolcache');
-            }
+        run: |
+          cd ./../action
+          npx tsx ./pr-checks/toolcache.ts installed
     env:
       CODEQL_ACTION_TEST_MODE: true

.github/workflows/__bundle-toolcache.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: bundle-toolcache-${{github.ref}}
+  group: bundle-toolcache-${{github.ref}}-${{inputs.java-version}}
 jobs:
   bundle-toolcache:
     strategy:
@@ -50,6 +60,20 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
+      - name: Install Node.js
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
+        with:
+          node-version: 20.x
+          cache: npm
+      - name: Install newer npm
+        run: npm install -g npm@11.19.1
+      - name: Install dependencies
+        run: npm ci
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -58,47 +82,30 @@ jobs:
           use-all-platform-bundle: 'false'
           setup-kotlin: 'true'
       - name: Remove CodeQL from toolcache
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-        with:
-          script: |
-            const fs = require('fs');
-            const path = require('path');
-            const codeqlPath = path.join(process.env['RUNNER_TOOL_CACHE'], 'CodeQL');
-            fs.rmdirSync(codeqlPath, { recursive: true });
-      - name: Install @actions/tool-cache
-        run: npm install @actions/tool-cache@3
+        run: |
+          cd ./../action
+          npx tsx ./pr-checks/toolcache.ts clear
+
       - name: Check toolcache does not contain CodeQL
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-        with:
-          script: |
-            const toolcache = require('@actions/tool-cache');
-            const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-            if (allCodeqlVersions.length !== 0) {
-              throw new Error(`CodeQL should not be found in the toolcache, but found ${allCodeqlVersions}`);
-            }
-            console.log('No versions of CodeQL found in the toolcache');
+        run: |
+          cd ./../action
+          npx tsx ./pr-checks/toolcache.ts absent
+
       - id: init
         uses: ./../action/init
         with:
           # Request multiple languages so this check uses the combined bundle.
           languages: javascript,python
           tools: ${{ steps.prepare-test.outputs.tools-url }}
+
       - uses: ./../action/analyze
         with:
           output: ${{ runner.temp }}/results
           upload-database: false
+
       - name: Check CodeQL is installed within the toolcache
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-        with:
-          script: |
-            const toolcache = require('@actions/tool-cache');
-            const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-            console.log(`Found CodeQL versions: ${allCodeqlVersions}`);
-            if (allCodeqlVersions.length === 0) {
-              throw new Error('CodeQL not found in toolcache');
-            }
-            if (allCodeqlVersions.length > 1) {
-              throw new Error('Multiple CodeQL versions found in toolcache');
-            }
+        run: |
+          cd ./../action
+          npx tsx ./pr-checks/toolcache.ts installed -n 1
     env:
       CODEQL_ACTION_TEST_MODE: true

.github/workflows/__cleanup-db-cluster-dir.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: cleanup-db-cluster-dir-${{github.ref}}
+  group: cleanup-db-cluster-dir-${{github.ref}}-${{inputs.java-version}}
 jobs:
   cleanup-db-cluster-dir:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__config-export.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: config-export-${{github.ref}}
+  group: config-export-${{github.ref}}-${{inputs.java-version}}
 jobs:
   config-export:
     strategy:
@@ -48,6 +58,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -65,7 +80,7 @@ jobs:
           output: '${{ runner.temp }}/results'
           upload-database: false
       - name: Upload SARIF
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: config-export-${{ matrix.os }}-${{ matrix.version }}.sarif.json
           path: '${{ runner.temp }}/results/javascript.sarif'

.github/workflows/__config-input.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: config-input-${{github.ref}}
+  group: config-input-${{github.ref}}-${{inputs.java-version}}
 jobs:
   config-input:
     strategy:
@@ -46,8 +56,13 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Install Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 20.x
           cache: npm

.github/workflows/__cpp-deptrace-disabled.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: cpp-deptrace-disabled-${{github.ref}}
+  group: cpp-deptrace-disabled-${{github.ref}}-${{inputs.java-version}}
 jobs:
   cpp-deptrace-disabled:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__cpp-deptrace-enabled-on-macos.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: cpp-deptrace-enabled-on-macos-${{github.ref}}
+  group: cpp-deptrace-enabled-on-macos-${{github.ref}}-${{inputs.java-version}}
 jobs:
   cpp-deptrace-enabled-on-macos:
     strategy:
@@ -48,6 +58,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__cpp-deptrace-enabled.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: cpp-deptrace-enabled-${{github.ref}}
+  group: cpp-deptrace-enabled-${{github.ref}}-${{inputs.java-version}}
 jobs:
   cpp-deptrace-enabled:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__diagnostics-export.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: diagnostics-export-${{github.ref}}
+  group: diagnostics-export-${{github.ref}}-${{inputs.java-version}}
 jobs:
   diagnostics-export:
     strategy:
@@ -48,6 +58,20 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
+      - name: Install Node.js
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
+        with:
+          node-version: 20.x
+          cache: npm
+      - name: Install newer npm
+        run: npm install -g npm@11.19.1
+      - name: Install dependencies
+        run: npm ci
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -76,61 +100,18 @@ jobs:
           output: '${{ runner.temp }}/results'
           upload-database: false
       - name: Upload SARIF
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: diagnostics-export-${{ matrix.os }}-${{ matrix.version }}.sarif.json
           path: '${{ runner.temp }}/results/javascript.sarif'
           retention-days: 7
+
       - name: Check diagnostics appear in SARIF
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
         env:
           SARIF_PATH: '${{ runner.temp }}/results/javascript.sarif'
-        with:
-          script: |
-            const fs = require('fs');
-
-            function checkStatusPageNotification(n) {
-              const expectedMessage = 'Plaintext message';
-              if (n.message.text !== expectedMessage) {
-                core.setFailed(`Expected the status page diagnostic to have the message '${expectedMessage}', but found '${n.message.text}'.`);
-              }
-              if (n.locations.length !== 1) {
-                core.setFailed(`Expected the status page diagnostic to have exactly 1 location, but found ${n.locations.length}.`);
-              }
-            }
-
-            const sarif = JSON.parse(fs.readFileSync(process.env['SARIF_PATH'], 'utf8'));
-            const run = sarif.runs[0];
-
-            const toolExecutionNotifications = run.invocations[0].toolExecutionNotifications;
-            const statusPageNotifications = toolExecutionNotifications.filter(n =>
-              n.descriptor.id === 'lang/diagnostics/example' && n.properties?.visibility?.statusPage
-            );
-            if (statusPageNotifications.length !== 1) {
-              core.setFailed(
-                'Expected exactly one status page reporting descriptor for this diagnostic in the ' +
-                  `'runs[].invocations[].toolExecutionNotifications[]' SARIF property, but found ` +
-                  `${statusPageNotifications.length}. All notification reporting descriptors: ` +
-                  `${JSON.stringify(toolExecutionNotifications)}.`
-              );
-            }
-            checkStatusPageNotification(statusPageNotifications[0]);
-
-            const notifications = run.tool.driver.notifications;
-            const diagnosticNotification = notifications.filter(n =>
-              n.id === 'lang/diagnostics/example' && n.name === 'lang/diagnostics/example' &&
-                n.fullDescription.text === 'Diagnostic name'
-            );
-            if (diagnosticNotification.length !== 1) {
-              core.setFailed(
-                'Expected exactly one notification for this diagnostic in the ' +
-                  `'runs[].tool.driver.notifications[]' SARIF property, but found ` +
-                  `${diagnosticNotification.length}. All notifications: ` +
-                  `${JSON.stringify(notifications)}.`
-              );
-            }
-
-            core.info('Finished diagnostic export test');
+        run: |
+          cd ../action
+          npx tsx ./pr-checks/check-diagnostics.ts
     env:
       CODEQL_ACTION_EXPORT_DIAGNOSTICS: true
       CODEQL_ACTION_TEST_MODE: true

.github/workflows/__diagnostics-without-db.yml

@@ -0,0 +1,158 @@
+# Warning: This file is generated automatically, and should not be modified.
+# Instead, please modify the template in the pr-checks directory and run:
+#     pr-checks/sync.sh
+# to regenerate this file.
+
+name: PR Check - Diagnostic export without database
+env:
+  GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+  GO111MODULE: auto
+on:
+  push:
+    branches:
+      - main
+      - releases/v*
+  pull_request: {}
+  merge_group:
+    types:
+      - checks_requested
+  schedule:
+    - cron: '0 5 * * *'
+  workflow_dispatch:
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
+  workflow_call:
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
+defaults:
+  run:
+    shell: bash
+concurrency:
+  cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
+  group: diagnostics-without-db-${{github.ref}}-${{inputs.java-version}}
+jobs:
+  diagnostics-without-db:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - os: ubuntu-latest
+            version: linked
+    name: Diagnostic export without database
+    if: github.triggering_actor != 'dependabot[bot]'
+    permissions:
+      contents: read
+      security-events: read
+    timeout-minutes: 45
+    runs-on: ${{ matrix.os }}
+    steps:
+      # We deliberately need to make this step fail before the database is initialised, but after
+      # some diagnostic has been produced. The simplest way to do that right now is to:
+      #
+      # - Produce a diagnostic before the db is initialised by forcing the use of a nightly release
+      #   with the `CODEQL_ACTION_FORCE_NIGHTLY` feature flag.
+      # - Cause `init` to abort because we are attempting to analyse Swift on a non-macOS runner.
+      #
+      - name: Check out repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
+      - name: Install Node.js
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
+        with:
+          node-version: 20.x
+          cache: npm
+      - name: Install newer npm
+        run: npm install -g npm@11.19.1
+      - name: Install dependencies
+        run: npm ci
+      - name: Prepare test
+        id: prepare-test
+        uses: ./.github/actions/prepare-test
+        with:
+          version: ${{ matrix.version }}
+          use-all-platform-bundle: 'false'
+          setup-kotlin: 'true'
+      - name: Initialise failing analysis
+        id: init
+        uses: ./../action/init
+        continue-on-error: true
+        env:
+          CODEQL_ACTION_FORCE_NIGHTLY: true
+        with:
+          languages: swift
+          tools: ${{ steps.prepare-test.outputs.tools-url }}
+
+      - name: Analyze
+        uses: ./analyze
+        # In a real workflow, this step wouldn't run. Since we used `continue-on-error`
+        # above, we manually disable it with an `if` condition. Having this step is required
+        # for the init post-action because it checks the workflow definition for e.g. the
+        # `category` input. Without this step, that part of the init post-action would fail.
+        if: false
+        with:
+          category: '/test-codeql-version:${{ matrix.version }}'
+
+      - name: Check diagnostics appear on disk
+        env:
+          DIAGNOSTICS_DIR: '${{ runner.temp }}/codeql-action-temp-diagnostics/'
+        run: |
+          cd ../action
+          npx tsx ./pr-checks/diagnostics-without-db.ts
+    env:
+      CODEQL_ACTION_SKIP_GENERATE_FAILED_SARIF: false
+      CODEQL_ACTION_SKIP_SARIF_UPLOAD: true
+      CODEQL_ACTION_TESTING_ENVIRONMENT: codeql-action-pr-checks
+      CODEQL_ACTION_TEST_MODE: true
+  diagnostics-without-db-validation:
+    if: github.triggering_actor != 'dependabot[bot]'
+    needs:
+      - diagnostics-without-db
+    permissions:
+      contents: read
+      security-events: read
+    timeout-minutes: 5
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out repository
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Node.js
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
+        with:
+          node-version: 20.x
+          cache: npm
+      - name: Install newer npm
+        run: npm install -g npm@11.19.1
+      - name: Install dependencies
+        run: npm ci
+      - name: Download workflow artifact
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        with:
+          pattern: test-mode-sarif-*
+          path: sarif
+
+      - name: List artifact contents
+        run: ls -laR ./sarif
+
+      - name: Check diagnostics appear in SARIF
+        env:
+          SARIF_PATH: "./sarif/codeql-failed-run.sarif"
+          DIAGNOSTIC_ID: "codeql-action/forced-nightly-cli"
+          DIAGNOSTIC_NAME: "A nightly release of CodeQL was used"
+          EXPECTED_LOCATIONS: "0"
+          EXPECTED_MESSAGE: |
+            GitHub configured this analysis to use a nightly release of CodeQL to allow you to preview changes from an upcoming release.
+        run: npx tsx ./pr-checks/check-diagnostics.ts
+    env:
+      CODEQL_ACTION_TEST_MODE: true

.github/workflows/__export-file-baseline-information.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: export-file-baseline-information-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: export-file-baseline-information-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   export-file-baseline-information:
     strategy:
@@ -79,6 +89,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -91,13 +106,18 @@ jobs:
         with:
           languages: javascript
           tools: ${{ steps.prepare-test.outputs.tools-url }}
+          # To balance speed and coverage, analyze only JavaScript but use the combined bundle so
+          # baseline information is reported for every language in the multi-language repository. A
+          # custom configuration prevents per-language bundles from being used.
+          config: |
+            paths-ignore: []
       - name: Build code
         run: ./build.sh
       - uses: ./../action/analyze
         with:
           output: '${{ runner.temp }}/results'
       - name: Upload SARIF
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: with-baseline-information-${{ matrix.os }}-${{ matrix.version }}.sarif.json
           path: '${{ runner.temp }}/results/javascript.sarif'
@@ -124,5 +144,4 @@ jobs:
     env:
       CODEQL_ACTION_SKIP_FILE_COVERAGE_ON_PRS: false
       CODEQL_ACTION_SUBLANGUAGE_FILE_COVERAGE: true
-      CODEQL_ACTION_PER_LANGUAGE_BUNDLES: false
       CODEQL_ACTION_TEST_MODE: true

.github/workflows/__extractor-ram-threads.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: extractor-ram-threads-${{github.ref}}
+  group: extractor-ram-threads-${{github.ref}}-${{inputs.java-version}}
 jobs:
   extractor-ram-threads:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-custom-queries.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-custom-queries-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: go-custom-queries-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-custom-queries:
     strategy:
@@ -77,6 +87,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-indirect-tracing-workaround-diagnostic.yml

@@ -25,6 +25,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       go-version:
@@ -32,12 +37,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-indirect-tracing-workaround-diagnostic-${{github.ref}}-${{inputs.go-version}}
+  group: go-indirect-tracing-workaround-diagnostic-${{github.ref}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-indirect-tracing-workaround-diagnostic:
     strategy:
@@ -61,6 +71,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-indirect-tracing-workaround-no-file-program.yml

@@ -25,6 +25,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       go-version:
@@ -32,12 +37,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-indirect-tracing-workaround-no-file-program-${{github.ref}}-${{inputs.go-version}}
+  group: go-indirect-tracing-workaround-no-file-program-${{github.ref}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-indirect-tracing-workaround-no-file-program:
     strategy:
@@ -61,6 +71,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-indirect-tracing-workaround.yml

@@ -25,6 +25,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       go-version:
@@ -32,12 +37,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-indirect-tracing-workaround-${{github.ref}}-${{inputs.go-version}}
+  group: go-indirect-tracing-workaround-${{github.ref}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-indirect-tracing-workaround:
     strategy:
@@ -61,6 +71,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-tracing-autobuilder.yml

@@ -25,6 +25,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       go-version:
@@ -32,12 +37,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-tracing-autobuilder-${{github.ref}}-${{inputs.go-version}}
+  group: go-tracing-autobuilder-${{github.ref}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-tracing-autobuilder:
     strategy:
@@ -81,6 +91,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-tracing-custom-build-steps.yml

@@ -25,6 +25,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       go-version:
@@ -32,12 +37,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-tracing-custom-build-steps-${{github.ref}}-${{inputs.go-version}}
+  group: go-tracing-custom-build-steps-${{github.ref}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-tracing-custom-build-steps:
     strategy:
@@ -81,6 +91,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go-tracing-legacy-workflow.yml

@@ -25,6 +25,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       go-version:
@@ -32,12 +37,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: go-tracing-legacy-workflow-${{github.ref}}-${{inputs.go-version}}
+  group: go-tracing-legacy-workflow-${{github.ref}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   go-tracing-legacy-workflow:
     strategy:
@@ -81,6 +91,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__go.yml

@@ -20,6 +20,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 jobs:
   go-custom-queries:
     name: 'Go: Custom queries'
@@ -30,6 +35,7 @@ jobs:
     with:
       dotnet-version: ${{ inputs.dotnet-version }}
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}
   go-indirect-tracing-workaround-diagnostic:
     name: 'Go: diagnostic when Go is changed after init step'
     permissions:
@@ -38,6 +44,7 @@ jobs:
     uses: ./.github/workflows/__go-indirect-tracing-workaround-diagnostic.yml
     with:
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}
   go-indirect-tracing-workaround-no-file-program:
     name: 'Go: diagnostic when `file` is not installed'
     permissions:
@@ -46,6 +53,7 @@ jobs:
     uses: ./.github/workflows/__go-indirect-tracing-workaround-no-file-program.yml
     with:
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}
   go-indirect-tracing-workaround:
     name: 'Go: workaround for indirect tracing'
     permissions:
@@ -54,6 +62,7 @@ jobs:
     uses: ./.github/workflows/__go-indirect-tracing-workaround.yml
     with:
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}
   go-tracing-autobuilder:
     name: 'Go: tracing with autobuilder step'
     permissions:
@@ -62,6 +71,7 @@ jobs:
     uses: ./.github/workflows/__go-tracing-autobuilder.yml
     with:
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}
   go-tracing-custom-build-steps:
     name: 'Go: tracing with custom build steps'
     permissions:
@@ -70,6 +80,7 @@ jobs:
     uses: ./.github/workflows/__go-tracing-custom-build-steps.yml
     with:
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}
   go-tracing-legacy-workflow:
     name: 'Go: tracing with legacy workflow'
     permissions:
@@ -78,3 +89,4 @@ jobs:
     uses: ./.github/workflows/__go-tracing-legacy-workflow.yml
     with:
       go-version: ${{ inputs.go-version }}
+      java-version: ${{ inputs.java-version }}

.github/workflows/__init-with-registries.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: init-with-registries-${{github.ref}}
+  group: init-with-registries-${{github.ref}}-${{inputs.java-version}}
 jobs:
   init-with-registries:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__javascript-source-root.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: javascript-source-root-${{github.ref}}
+  group: javascript-source-root-${{github.ref}}-${{inputs.java-version}}
 jobs:
   javascript-source-root:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__job-run-uuid-sarif.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: job-run-uuid-sarif-${{github.ref}}
+  group: job-run-uuid-sarif-${{github.ref}}-${{inputs.java-version}}
 jobs:
   job-run-uuid-sarif:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -62,7 +77,7 @@ jobs:
         with:
           output: '${{ runner.temp }}/results'
       - name: Upload SARIF
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: ${{ matrix.os }}-${{ matrix.version }}.sarif.json
           path: '${{ runner.temp }}/results/javascript.sarif'

.github/workflows/__language-aliases.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: language-aliases-${{github.ref}}
+  group: language-aliases-${{github.ref}}-${{inputs.java-version}}
 jobs:
   language-aliases:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__linux-arm64.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: linux-arm64-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: linux-arm64-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   linux-arm64:
     strategy:
@@ -75,6 +85,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__local-bundle.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: local-bundle-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: local-bundle-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   local-bundle:
     strategy:
@@ -75,6 +85,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__multi-language-autodetect.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: multi-language-autodetect-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: multi-language-autodetect-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   multi-language-autodetect:
     strategy:
@@ -109,6 +119,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -192,6 +207,5 @@ jobs:
             exit 1
           fi
     env:
-      CODEQL_ACTION_CLEANUP_TOOLCACHE_BUNDLES: true
       CODEQL_ACTION_RESOLVE_SUPPORTED_LANGUAGES_USING_CLI: true
       CODEQL_ACTION_TEST_MODE: true

.github/workflows/__overlay-init-fallback.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: overlay-init-fallback-${{github.ref}}
+  group: overlay-init-fallback-${{github.ref}}-${{inputs.java-version}}
 jobs:
   overlay-init-fallback:
     strategy:
@@ -48,6 +58,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__packaging-codescanning-config-inputs-js.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: packaging-codescanning-config-inputs-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: packaging-codescanning-config-inputs-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   packaging-codescanning-config-inputs-js:
     strategy:
@@ -79,8 +89,13 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Install Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 20.x
           cache: npm

.github/workflows/__packaging-config-inputs-js.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: packaging-config-inputs-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: packaging-config-inputs-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   packaging-config-inputs-js:
     strategy:
@@ -79,8 +89,13 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Install Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 20.x
           cache: npm

.github/workflows/__packaging-config-js.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: packaging-config-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: packaging-config-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   packaging-config-js:
     strategy:
@@ -79,8 +89,13 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Install Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 20.x
           cache: npm

.github/workflows/__packaging-inputs-js.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: packaging-inputs-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: packaging-inputs-js-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   packaging-inputs-js:
     strategy:
@@ -79,8 +89,13 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Install Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 20.x
           cache: npm

.github/workflows/__per-language-bundle-validation.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: per-language-bundle-validation-${{github.ref}}
+  group: per-language-bundle-validation-${{github.ref}}-${{inputs.java-version}}
 jobs:
   per-language-bundle-validation:
     strategy:
@@ -36,40 +46,40 @@ jobs:
         include:
           - language: actions
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
             expected-extractors: actions javascript
           - language: cpp
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
             build-mode: manual
             build-command: gcc -o main main.c
           - language: csharp
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
             build-mode: none
           - language: go
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
             build-mode: autobuild
           - language: java
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
             build-mode: none
           - language: javascript
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
           - language: python
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
           - language: ruby
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
           - language: rust
             os: ubuntu-latest
-            version: nightly-latest
+            version: linked
           - language: swift
             os: macos-latest-xlarge
-            version: nightly-latest
+            version: linked
             build-mode: autobuild
     name: Per-language bundles
     if: github.triggering_actor != 'dependabot[bot]'
@@ -81,6 +91,20 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
+      - name: Install Node.js
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
+        with:
+          node-version: 20.x
+          cache: npm
+      - name: Install newer npm
+        run: npm install -g npm@11.19.1
+      - name: Install dependencies
+        run: npm ci
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -88,6 +112,10 @@ jobs:
           version: ${{ matrix.version }}
           use-all-platform-bundle: 'false'
           setup-kotlin: 'true'
+      - name: Remove CodeQL from toolcache
+        run: |
+          cd ./../action
+          npx tsx ./pr-checks/toolcache.ts clear
       - uses: ./../action/init
         id: init
         with:
@@ -128,9 +156,8 @@ jobs:
           CODEQL_PATH: ${{ steps.init.outputs.codeql-path }}
         run: |
           # A bundle that is missing most of its extractors must never be left in the toolcache,
-          # where a later job analyzing a different language could pick it up. The runner image
-          # ships with its own CodeQL in the toolcache, so check where this bundle was extracted to
-          # rather than whether the toolcache contains CodeQL at all.
+          # where a later job analyzing a different language could pick it up. Per-language bundles
+          # must instead be extracted under the runner's temporary directory.
           echo "CodeQL is at $CODEQL_PATH"
           if [[ "$CODEQL_PATH" == "$RUNNER_TOOL_CACHE"/* ]]; then
             echo "::error::The per-language bundle was added to the toolcache at $CODEQL_PATH."
@@ -160,5 +187,4 @@ jobs:
           fi
           echo "Created a ${LANGUAGE} database at ${database}."
     env:
-      CODEQL_ACTION_PER_LANGUAGE_BUNDLES: true
       CODEQL_ACTION_TEST_MODE: true

.github/workflows/__remote-config.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: remote-config-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: remote-config-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   remote-config:
     strategy:
@@ -77,6 +87,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__resolve-environment-action.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: resolve-environment-action-${{github.ref}}
+  group: resolve-environment-action-${{github.ref}}-${{inputs.java-version}}
 jobs:
   resolve-environment-action:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__rubocop-multi-language.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: rubocop-multi-language-${{github.ref}}
+  group: rubocop-multi-language-${{github.ref}}-${{inputs.java-version}}
 jobs:
   rubocop-multi-language:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -54,7 +69,7 @@ jobs:
           use-all-platform-bundle: 'false'
           setup-kotlin: 'true'
       - name: Set up Ruby
-        uses: ruby/setup-ruby@14594264cd68ce8a2345dd349bc3d138a4ef85c8 # v1.327.0
+        uses: ruby/setup-ruby@651ff0d62c5c79bed6d53ec518387aae20e72c1a # v1.329.0
         with:
           ruby-version: 2.6
       - name: Install Code Scanning integration

.github/workflows/__ruby.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: ruby-${{github.ref}}
+  group: ruby-${{github.ref}}-${{inputs.java-version}}
 jobs:
   ruby:
     strategy:
@@ -56,6 +66,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__rust.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: rust-${{github.ref}}
+  group: rust-${{github.ref}}-${{inputs.java-version}}
 jobs:
   rust:
     strategy:
@@ -54,6 +64,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__split-workflow.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: split-workflow-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: split-workflow-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   split-workflow:
     strategy:
@@ -85,6 +95,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__start-proxy.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: start-proxy-${{github.ref}}
+  group: start-proxy-${{github.ref}}-${{inputs.java-version}}
 jobs:
   start-proxy:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__submit-sarif-failure.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: submit-sarif-failure-${{github.ref}}
+  group: submit-sarif-failure-${{github.ref}}-${{inputs.java-version}}
 jobs:
   submit-sarif-failure:
     strategy:
@@ -50,6 +60,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test
@@ -71,7 +86,9 @@ jobs:
         run: exit 1
       - uses: ./analyze
         # In a real workflow, this step wouldn't run. Since we used `continue-on-error`
-        # above, we manually disable it with an `if` condition.
+        # above, we manually disable it with an `if` condition. Having this step is required
+        # for the init post-action because it checks the workflow definition for e.g. the
+        # `category` input. Without this step, that part of the init post-action would fail.
         if: false
         with:
           category: '/test-codeql-version:${{ matrix.version }}'

.github/workflows/__swift-autobuild.yml

@@ -19,15 +19,25 @@ on:
   schedule:
     - cron: '0 5 * * *'
   workflow_dispatch:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
-    inputs: {}
+    inputs:
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: swift-autobuild-${{github.ref}}
+  group: swift-autobuild-${{github.ref}}-${{inputs.java-version}}
 jobs:
   swift-autobuild:
     strategy:
@@ -46,6 +56,11 @@ jobs:
     steps:
       - name: Check out repository
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__swift-custom-build.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: swift-custom-build-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: swift-custom-build-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   swift-custom-build:
     strategy:
@@ -79,6 +89,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__unset-environment.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: unset-environment-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: unset-environment-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   unset-environment:
     strategy:
@@ -77,6 +87,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__upload-ref-sha-input.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: upload-ref-sha-input-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: upload-ref-sha-input-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   upload-ref-sha-input:
     strategy:
@@ -75,6 +85,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__upload-sarif.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: upload-sarif-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: upload-sarif-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   upload-sarif:
     strategy:
@@ -82,6 +92,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/__with-checkout-path.yml

@@ -30,6 +30,11 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
   workflow_call:
     inputs:
       dotnet-version:
@@ -42,12 +47,17 @@ on:
         description: The version of Go to install
         required: false
         default: '>=1.21.0'
+      java-version:
+        type: string
+        description: The version of Java to install
+        required: false
+        default: '17'
 defaults:
   run:
     shell: bash
 concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' || false }}
-  group: with-checkout-path-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}
+  group: with-checkout-path-${{github.ref}}-${{inputs.dotnet-version}}-${{inputs.go-version}}-${{inputs.java-version}}
 jobs:
   with-checkout-path:
     strategy:
@@ -76,6 +86,11 @@ jobs:
         with:
           go-version: ${{ inputs.go-version || '>=1.21.0' }}
           cache: false
+      - name: Install Java
+        uses: actions/setup-java@b843ebf9b913146b38da2eaa7aeddf76074ae1ad # v6.1.0
+        with:
+          java-version: ${{ inputs.java-version || '17' }}
+          distribution: temurin
       - name: Prepare test
         id: prepare-test
         uses: ./.github/actions/prepare-test

.github/workflows/codescanning-config-cli.yml

@@ -57,7 +57,7 @@ jobs:
       uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
     - name: Set up Node.js
-      uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+      uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
       with:
         node-version: 24
         cache: 'npm'

.github/workflows/debug-artifacts-failure-safe.yml

@@ -89,7 +89,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Download all artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
       - name: Check expected artifacts exist
         run: |
           LANGUAGES="cpp csharp go java javascript python"

.github/workflows/debug-artifacts-safe.yml

@@ -82,7 +82,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Download all artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
       - name: Check expected artifacts exist
         run: |
           VERSIONS="stable-v2.20.7 default linked nightly-latest"

.github/workflows/post-release-mergeback.yml

@@ -47,7 +47,7 @@ jobs:
       - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
         with:
           fetch-depth: 0  # ensure we have all tags and can push commits
-      - uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+      - uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 24
           cache: 'npm'
@@ -134,7 +134,7 @@ jobs:
           echo "::endgroup::"
 
       - name: Generate token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@64ab729a6294000f5aa4a4bc0b73d1f32bc45510 # v3.3.0
         id: app-token
         with:
           app-id: ${{ vars.AUTOMATION_APP_ID }}

.github/workflows/pr-checks.yml

@@ -2,6 +2,9 @@ name: PR Checks
 
 on:
   push:
+    branches:
+      - "main"
+      - "releases/v*"
   pull_request:
   merge_group:
     types: [checks_requested]
@@ -42,7 +45,7 @@ jobs:
       - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Set up Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: ${{ matrix.node-version }}
           cache: "npm"
@@ -110,7 +113,7 @@ jobs:
           fi
 
       - name: Set up Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 24
           cache: "npm"
@@ -145,12 +148,11 @@ jobs:
 
       - name: Fetch base commit
         id: fetch-base
-        # Forks and Dependabot PRs don't have permission to write comments, so skip the repo size
-        # check in those cases.
+        # Skip this (and subsequent steps) if the PR originates from a fork, since this workflow
+        # won't have the necessary permissions to post comments on the PR.
         if: >-
           github.event_name == 'pull_request' &&
-          github.event.pull_request.head.repo.full_name == github.repository &&
-          github.event.pull_request.user.login != 'dependabot[bot]'
+          github.event.pull_request.head.repo.full_name == github.repository
         env:
           BASE_SHA: ${{ github.event.pull_request.base.sha }}
           HEAD_SHA: ${{ github.event.pull_request.head.sha }}
@@ -175,7 +177,7 @@ jobs:
 
       - name: Upload repo size comment
         if: steps.fetch-base.outcome == 'success'
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
         with:
           name: repo-size-comment
           path: ${{ runner.temp }}/repo-size/
@@ -209,7 +211,7 @@ jobs:
     if: >-
       github.event_name == 'pull_request' &&
       github.event.pull_request.head.repo.full_name == github.repository &&
-      github.event.pull_request.user.login != 'dependabot[bot]' &&
+      github.actor != 'dependabot[bot]' &&
       needs.other-checks.result == 'success'
     permissions:
       contents: read
@@ -223,7 +225,7 @@ jobs:
 
     steps:
       - name: Download repo size comment
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
         with:
           name: repo-size-comment
           path: repo-size-comment

.github/workflows/pr-dequeued.yml

@@ -0,0 +1,28 @@
+name: PR dequeued
+
+on:
+  pull_request:
+    types:
+      - dequeued
+
+jobs:
+  notify:
+    name: Notify
+    runs-on: ubuntu-slim
+
+    if: github.event.pull_request.merged != true
+
+    permissions:
+      pull-requests: write
+
+    steps:
+      - name: Notify that the PR was removed from the merge queue
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          PR_NUMBER: ${{ github.event.pull_request.number }}
+          REASON: ${{ github.event.reason }}
+          USER: ${{ github.event.pull_request.user.login }}
+        run: |
+          echo "@$USER The pull request was removed from the merge queue (\`$REASON\`)." \
+            "Please resolve any issues if required and enqueue the PR again." |
+            gh pr comment --body-file - --repo github/codeql-action "$PR_NUMBER"

.github/workflows/query-filters.yml

@@ -33,7 +33,7 @@ jobs:
       uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
     - name: Install Node.js
-      uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+      uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
       with:
         node-version: 24
         cache: npm

.github/workflows/rebuild.yml

@@ -30,7 +30,7 @@ jobs:
           ref: ${{ env.HEAD_REF }}
 
       - name: Set up Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 24
           cache: 'npm'

.github/workflows/rollback-release.yml

@@ -139,7 +139,7 @@ jobs:
 
       - name: Generate token
         if: github.event_name == 'workflow_dispatch'
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@64ab729a6294000f5aa4a4bc0b73d1f32bc45510 # v3.3.0
         id: app-token
         with:
           app-id: ${{ vars.AUTOMATION_APP_ID }}

.github/workflows/update-bundle.yml

@@ -41,7 +41,7 @@ jobs:
           git config --global user.name "github-actions[bot]"
 
       - name: Set up Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 24
           cache: 'npm'

.github/workflows/update-release-branch.yml

@@ -95,7 +95,7 @@ jobs:
       pull-requests: write # needed to create pull request
     steps:
     - name: Generate token
-      uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+      uses: actions/create-github-app-token@64ab729a6294000f5aa4a4bc0b73d1f32bc45510 # v3.3.0
       id: app-token
       with:
         app-id: ${{ vars.AUTOMATION_APP_ID }}

.github/workflows/update-supported-enterprise-server-versions.yml

@@ -26,7 +26,7 @@ jobs:
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
 
       - name: Set up Node.js
-        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        uses: actions/setup-node@949feb2413d6458794dcd2491c4babbbce0c15c1 # v7.1.0
         with:
           node-version: 24
           cache: 'npm'

CHANGELOG.md

@@ -2,6 +2,14 @@
 
 See the [releases page](https://github.com/github/codeql-action/releases) for the relevant changes to the CodeQL CLI and language packs.
 
+## [UNRELEASED]
+
+No user facing changes.
+
+## 4.39.1 - 21 Oct 2026
+
+- Update default CodeQL bundle version to [2.27.3](https://github.com/github/codeql-action/releases/tag/codeql-bundle-v2.27.3). [#4256](https://github.com/github/codeql-action/pull/4256)
+
 ## 4.39.0 - 15 Oct 2026
 
 - _Breaking change_: Bump the minimum required CodeQL bundle version to 2.20.7. [#4205](https://github.com/github/codeql-action/pull/4205)

init/action.yml

@@ -153,7 +153,10 @@ inputs:
     required: false
   trap-caching:
     description: >-
-      Explicitly enable or disable TRAP caching rather than respecting the feature flag for it.
+      Explicitly enable or disable TRAP caching instead of using the automatically determined default.
+      TRAP caching is disabled by default when improved incremental analysis is enabled,
+      because improved incremental analysis of a pull request only extracts changed files,
+      which rarely benefit from TRAP caching.
     required: false
   dependency-caching:
     description: >-

lib/defaults.json

@@ -1,6 +1,6 @@
 {
-  "bundleVersion": "codeql-bundle-v2.27.2",
-  "cliVersion": "2.27.2",
-  "priorBundleVersion": "codeql-bundle-v2.27.1",
-  "priorCliVersion": "2.27.1"
+  "bundleVersion": "codeql-bundle-v2.27.3",
+  "cliVersion": "2.27.3",
+  "priorBundleVersion": "codeql-bundle-v2.27.2",
+  "priorCliVersion": "2.27.2"
 }

package-lock.json

@@ -1,12 +1,12 @@
 {
   "name": "codeql",
-  "version": "4.39.0",
+  "version": "4.39.2",
   "lockfileVersion": 3,
   "requires": true,
   "packages": {
     "": {
       "name": "codeql",
-      "version": "4.39.0",
+      "version": "4.39.2",
       "license": "MIT",
       "workspaces": [
         "pr-checks"
@@ -36,7 +36,7 @@
         "node-forge": "^1.4.0",
         "semver": "^7.8.5",
         "undici": "^6.28.0",
-        "uuid": "^14.0.2"
+        "uuid": "^14.0.3"
       },
       "devDependencies": {
         "@ava/typescript": "6.0.0",
@@ -57,14 +57,14 @@
         "eslint-import-resolver-typescript": "^4.4.5",
         "eslint-plugin-github": "^6.1.2",
         "eslint-plugin-import-x": "^4.17.1",
-        "eslint-plugin-jsdoc": "^65.2.0",
+        "eslint-plugin-jsdoc": "^65.3.4",
         "eslint-plugin-no-async-foreach": "^0.1.1",
         "glob": "^13.0.6",
         "globals": "^17.13.0",
         "nock": "^14.0.17",
         "sinon": "^22.1.0",
         "typescript": "^6.0.3",
-        "typescript-eslint": "^8.71.1"
+        "typescript-eslint": "^8.71.2"
       }
     },
     "node_modules/@aashutoshrathi/word-wrap": {
@@ -2702,17 +2702,17 @@
       "license": "MIT"
     },
     "node_modules/@typescript-eslint/eslint-plugin": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/eslint-plugin/-/eslint-plugin-8.71.1.tgz",
-      "integrity": "sha512-nNlBf6HuotqMgZvSkWD5hNdemiBIxQ2NmrlgfcUIeZRs+BbakjscCQRq/Hb74EFVnFiSWWdL12JruqwBy3ERDw==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/eslint-plugin/-/eslint-plugin-8.71.2.tgz",
+      "integrity": "sha512-K72/pvT7qpm8q3k8G5u93NCSN1RcLxX5h7Gw0bQpbMXviBHeY6Nx1WEwmk9wP+eKTSQ8ecxvcgt/ZX/rB938xQ==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
         "@eslint-community/regexpp": "^4.12.2",
-        "@typescript-eslint/scope-manager": "8.71.1",
-        "@typescript-eslint/type-utils": "8.71.1",
-        "@typescript-eslint/utils": "8.71.1",
-        "@typescript-eslint/visitor-keys": "8.71.1",
+        "@typescript-eslint/scope-manager": "8.71.2",
+        "@typescript-eslint/type-utils": "8.71.2",
+        "@typescript-eslint/utils": "8.71.2",
+        "@typescript-eslint/visitor-keys": "8.71.2",
         "ignore": "^7.0.5",
         "natural-compare": "^1.4.0",
         "ts-api-utils": "^2.5.0"
@@ -2725,7 +2725,7 @@
         "url": "https://opencollective.com/typescript-eslint"
       },
       "peerDependencies": {
-        "@typescript-eslint/parser": "^8.71.1",
+        "@typescript-eslint/parser": "^8.71.2",
         "eslint": "^8.57.0 || ^9.0.0 || ^10.0.0",
         "typescript": ">=4.8.4 <6.1.0"
       }
@@ -2741,16 +2741,16 @@
       }
     },
     "node_modules/@typescript-eslint/parser": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/parser/-/parser-8.71.1.tgz",
-      "integrity": "sha512-oM/5sAqz/l1v/zYK1qTOPrn2+JIrBGC1V6uNYucRO5gh6eT9vWJ/RhPbGE59byvZEUQ4VP6XkLBaS5Jti5jpvw==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/parser/-/parser-8.71.2.tgz",
+      "integrity": "sha512-aTtmZjp/x3gsGHkDs04/1I8kNogBJkpQaeGaN0PfiG43NzDEmW2n+OP5im9wfsvyX0yP1UZWBrAGtDBfH9jEVw==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/scope-manager": "8.71.1",
-        "@typescript-eslint/types": "8.71.1",
-        "@typescript-eslint/typescript-estree": "8.71.1",
-        "@typescript-eslint/visitor-keys": "8.71.1",
+        "@typescript-eslint/scope-manager": "8.71.2",
+        "@typescript-eslint/types": "8.71.2",
+        "@typescript-eslint/typescript-estree": "8.71.2",
+        "@typescript-eslint/visitor-keys": "8.71.2",
         "debug": "^4.4.3"
       },
       "engines": {
@@ -2784,14 +2784,14 @@
       }
     },
     "node_modules/@typescript-eslint/project-service": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/project-service/-/project-service-8.71.1.tgz",
-      "integrity": "sha512-Oijc9RUsohHjncg6iGi7gCtjnEjYt9FWv9u6ygK8uKcHK5eLjLAkqERQ9BaytbpceOFdk6kifPCS/zAZE+A99g==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/project-service/-/project-service-8.71.2.tgz",
+      "integrity": "sha512-Pd68GsLVh5ZXlcEccFPdhSOvtHZ/2WU0XsA8zmXOS3F158lVlcTLhfQ6qvtL1RzbMie0Kp8xtbVwAg4nejKPHw==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/tsconfig-utils": "^8.71.1",
-        "@typescript-eslint/types": "^8.71.1",
+        "@typescript-eslint/tsconfig-utils": "^8.71.2",
+        "@typescript-eslint/types": "^8.71.2",
         "debug": "^4.4.3"
       },
       "engines": {
@@ -2824,14 +2824,14 @@
       }
     },
     "node_modules/@typescript-eslint/scope-manager": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/scope-manager/-/scope-manager-8.71.1.tgz",
-      "integrity": "sha512-1YUDZXdTnXLlob03SFHBipdyMBsDVm7zoSz0ytTJ39dk5J1TgsTK03VlR/dLXG/RLLUrPcYbD4rp23BmHxHP0w==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/scope-manager/-/scope-manager-8.71.2.tgz",
+      "integrity": "sha512-YF4wgg5iUX5Obywoac27B56FhozMNFhdJSbh11H5GBAwmBtfyRhmgTQqW9tRNNmHDvsZ2CX6UGzoz+YfYn2Leg==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/types": "8.71.1",
-        "@typescript-eslint/visitor-keys": "8.71.1"
+        "@typescript-eslint/types": "8.71.2",
+        "@typescript-eslint/visitor-keys": "8.71.2"
       },
       "engines": {
         "node": "^18.18.0 || ^20.9.0 || >=21.1.0"
@@ -2842,9 +2842,9 @@
       }
     },
     "node_modules/@typescript-eslint/tsconfig-utils": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/tsconfig-utils/-/tsconfig-utils-8.71.1.tgz",
-      "integrity": "sha512-oTvkml5SxXhgg+WWKhod5qWQICDXtOB+/Hi9VdPKFAANJ2b7YOgMffgvzXuqog7R6A/JtrzRf128dsxummyWhg==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/tsconfig-utils/-/tsconfig-utils-8.71.2.tgz",
+      "integrity": "sha512-jz49TAWokm/7yWD9/o837nYax9DyALxIPOImdImvVzo6canBCZYzin8zJyqNR5k1j9K1DE0bVvr0XYB+99uAdg==",
       "dev": true,
       "license": "MIT",
       "engines": {
@@ -2859,15 +2859,15 @@
       }
     },
     "node_modules/@typescript-eslint/type-utils": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/type-utils/-/type-utils-8.71.1.tgz",
-      "integrity": "sha512-kH3t3jZCYv2PZSBEWPKTariLrCaoF1CLoPitYFBJOhAGEwWnSRAtGEifrfrpBa4K9JlwWNZotgA5w3/wLSk/FQ==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/type-utils/-/type-utils-8.71.2.tgz",
+      "integrity": "sha512-cC8UaalCViJkb3rH/xLIvidEwoFRtMZMUqDjjJMGEKaTFwYRHYBcoczlEGHuvkHEO8svRDrgZ0yQgOArFmwang==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/types": "8.71.1",
-        "@typescript-eslint/typescript-estree": "8.71.1",
-        "@typescript-eslint/utils": "8.71.1",
+        "@typescript-eslint/types": "8.71.2",
+        "@typescript-eslint/typescript-estree": "8.71.2",
+        "@typescript-eslint/utils": "8.71.2",
         "debug": "^4.4.3",
         "ts-api-utils": "^2.5.0"
       },
@@ -2902,9 +2902,9 @@
       }
     },
     "node_modules/@typescript-eslint/types": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/types/-/types-8.71.1.tgz",
-      "integrity": "sha512-ybYnPTUwg3VQQOFEiBPLs8Jxl1ry2vXdn1kVKguomBbvxpetdu3MKTNDqFNUrlG8ylP9MpZosmXMFYlGQHk1oQ==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/types/-/types-8.71.2.tgz",
+      "integrity": "sha512-y5Ukl3oVp7e/VGxqIoEXoeb/Roj71PAJ4WG/N/RGj+eeDvKRLM15kGr9MijLbN0i03S52zxu31Z98E5gWChJKw==",
       "dev": true,
       "license": "MIT",
       "engines": {
@@ -2916,16 +2916,16 @@
       }
     },
     "node_modules/@typescript-eslint/typescript-estree": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/typescript-estree/-/typescript-estree-8.71.1.tgz",
-      "integrity": "sha512-pSKSEK1JJpHs6KiKVtABCE4iJK5d7FLFzDXQNBQ2oRY7LEd3UwOt3TZemTgu9syTIf56dJWlTn/pdmrO9oKUXQ==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/typescript-estree/-/typescript-estree-8.71.2.tgz",
+      "integrity": "sha512-DgNOEsl4pdYzwSL+N/Cl33tX1Hlw3FvId73LnKXfq7jnrF2viOEn7X+P7RBkkSWCVm92gnWd28GIC5vJuLREeA==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/project-service": "8.71.1",
-        "@typescript-eslint/tsconfig-utils": "8.71.1",
-        "@typescript-eslint/types": "8.71.1",
-        "@typescript-eslint/visitor-keys": "8.71.1",
+        "@typescript-eslint/project-service": "8.71.2",
+        "@typescript-eslint/tsconfig-utils": "8.71.2",
+        "@typescript-eslint/types": "8.71.2",
+        "@typescript-eslint/visitor-keys": "8.71.2",
         "debug": "^4.4.3",
         "minimatch": "^10.2.2",
         "semver": "^7.7.3",
@@ -3001,16 +3001,16 @@
       }
     },
     "node_modules/@typescript-eslint/utils": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/utils/-/utils-8.71.1.tgz",
-      "integrity": "sha512-CBjT6gfAz3DW2j9Q4moFnqt208Aq+506sVGXfpRcyAeqn0EpayL0mjdWoCO2t3RC7GewNrFxdeehuEaPg6DMzQ==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/utils/-/utils-8.71.2.tgz",
+      "integrity": "sha512-RyKa1G1M9rKHDhrk+HJtiF1MvLD5Ux2JW3TSkzw+02pRALdpJb+QzG1Y5em+LvCgzGwgg8H7mBRFKljNz7ImPw==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
         "@eslint-community/eslint-utils": "^4.9.1",
-        "@typescript-eslint/scope-manager": "8.71.1",
-        "@typescript-eslint/types": "8.71.1",
-        "@typescript-eslint/typescript-estree": "8.71.1"
+        "@typescript-eslint/scope-manager": "8.71.2",
+        "@typescript-eslint/types": "8.71.2",
+        "@typescript-eslint/typescript-estree": "8.71.2"
       },
       "engines": {
         "node": "^18.18.0 || ^20.9.0 || >=21.1.0"
@@ -3025,13 +3025,13 @@
       }
     },
     "node_modules/@typescript-eslint/visitor-keys": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/@typescript-eslint/visitor-keys/-/visitor-keys-8.71.1.tgz",
-      "integrity": "sha512-0GxiUGqMU0qXJt58cBsiG3DP8lUmBaFo2vChtUX+CT7PnR3v/VGLLrzVP4K9r1lNiZXjHYefMBbPunplr09v6w==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/@typescript-eslint/visitor-keys/-/visitor-keys-8.71.2.tgz",
+      "integrity": "sha512-zozlN0UA32bSG2zkKAgQyRYSbEISVoyU6vvkKYo2aSny74D8Jh4e+POkJ6Lk0dlezZi5x7TtD+88Xb06IB8nhg==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/types": "8.71.1",
+        "@typescript-eslint/types": "8.71.2",
         "eslint-visitor-keys": "^5.0.0"
       },
       "engines": {
@@ -5365,9 +5365,9 @@
       }
     },
     "node_modules/eslint-plugin-jsdoc": {
-      "version": "65.2.0",
-      "resolved": "https://registry.npmjs.org/eslint-plugin-jsdoc/-/eslint-plugin-jsdoc-65.2.0.tgz",
-      "integrity": "sha512-IMZaNwdDa5otUQYGWN1pzywZLsGKswitvFFNhcO8IOsBfaWpWIDXYuZh2sYhe9MNyKN9hz0YryOFaKdpbTP5Bw==",
+      "version": "65.3.4",
+      "resolved": "https://registry.npmjs.org/eslint-plugin-jsdoc/-/eslint-plugin-jsdoc-65.3.4.tgz",
+      "integrity": "sha512-Z3/ro8sZPqnXKhyAzCNa3F7KCZ3js5xVx/q9BEvTjUGzN6OIQfdb+q3Sc9lJ3zCfyPnN0tI524ulZjYRxAwnAw==",
       "dev": true,
       "license": "BSD-3-Clause",
       "dependencies": {
@@ -9981,16 +9981,16 @@
       }
     },
     "node_modules/typescript-eslint": {
-      "version": "8.71.1",
-      "resolved": "https://registry.npmjs.org/typescript-eslint/-/typescript-eslint-8.71.1.tgz",
-      "integrity": "sha512-oiNVPC3/NbV1FpaHU07l8O6ynqG9v4PAiW2WvTrAmZdR0f2HI/gE668ElMLCK7Xbsu5k2fK5C4fXNiq05j7/nQ==",
+      "version": "8.71.2",
+      "resolved": "https://registry.npmjs.org/typescript-eslint/-/typescript-eslint-8.71.2.tgz",
+      "integrity": "sha512-Rz4effbMy2g9wnvOJZG6SbVavX313Lap1vNEbk1RUochzickvzP8P4HB+bkNg5e50eVz1hQGjh9K1omI1xB4Bw==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@typescript-eslint/eslint-plugin": "8.71.1",
-        "@typescript-eslint/parser": "8.71.1",
-        "@typescript-eslint/typescript-estree": "8.71.1",
-        "@typescript-eslint/utils": "8.71.1"
+        "@typescript-eslint/eslint-plugin": "8.71.2",
+        "@typescript-eslint/parser": "8.71.2",
+        "@typescript-eslint/typescript-estree": "8.71.2",
+        "@typescript-eslint/utils": "8.71.2"
       },
       "engines": {
         "node": "^18.18.0 || ^20.9.0 || >=21.1.0"
@@ -10167,9 +10167,9 @@
       "license": "MIT"
     },
     "node_modules/uuid": {
-      "version": "14.0.2",
-      "resolved": "https://registry.npmjs.org/uuid/-/uuid-14.0.2.tgz",
-      "integrity": "sha512-xZe/16rV4aa+HGSOCiY2YeLT1OybRLrrkL/Rqaq7p7GMVXjFh+6wN4oMYgjFmnSnhY8t6Xpdl2l9qmnHYuMHwQ==",
+      "version": "14.0.3",
+      "resolved": "https://registry.npmjs.org/uuid/-/uuid-14.0.3.tgz",
+      "integrity": "sha512-Sc5u1VVln93y1Xnz4R+CunOZc7R9LUcTmhj7Rc7Eg3HVcf7rVn2FOoa812fe0W8p3jD7xeoGSYbfqCGGH2B6xw==",
       "funding": [
         "https://github.com/sponsors/broofa",
         "https://github.com/sponsors/ctavan"
@@ -10484,6 +10484,7 @@
       "dependencies": {
         "@actions/core": "^2.0.3",
         "@actions/github": "^8.0.1",
+        "@actions/tool-cache": "^3.0.1",
         "@octokit/core": "^7.0.8",
         "@octokit/plugin-paginate-rest": ">=16.0.0",
         "@octokit/plugin-rest-endpoint-methods": "^18.0.0",

package.json

@@ -1,6 +1,6 @@
 {
   "name": "codeql",
-  "version": "4.39.0",
+  "version": "4.39.2",
   "private": true,
   "description": "CodeQL action",
   "scripts": {
@@ -44,7 +44,7 @@
     "node-forge": "^1.4.0",
     "semver": "^7.8.5",
     "undici": "^6.28.0",
-    "uuid": "^14.0.2"
+    "uuid": "^14.0.3"
   },
   "devDependencies": {
     "@ava/typescript": "6.0.0",
@@ -65,14 +65,14 @@
     "eslint-import-resolver-typescript": "^4.4.5",
     "eslint-plugin-github": "^6.1.2",
     "eslint-plugin-import-x": "^4.17.1",
-    "eslint-plugin-jsdoc": "^65.2.0",
+    "eslint-plugin-jsdoc": "^65.3.4",
     "eslint-plugin-no-async-foreach": "^0.1.1",
     "glob": "^13.0.6",
     "globals": "^17.13.0",
     "nock": "^14.0.17",
     "sinon": "^22.1.0",
     "typescript": "^6.0.3",
-    "typescript-eslint": "^8.71.1"
+    "typescript-eslint": "^8.71.2"
   },
   "overrides": {
     "@actions/tool-cache": {

pr-checks/check-diagnostics.ts

@@ -0,0 +1,92 @@
+import fs from "fs";
+
+import * as core from "@actions/core";
+
+import * as sarif from "../src/sarif";
+
+const DIAGNOSTIC_ID =
+  process.env["DIAGNOSTIC_ID"] ?? "lang/diagnostics/example";
+const DIAGNOSTIC_NAME = process.env["DIAGNOSTIC_NAME"] ?? "Diagnostic name";
+const EXPECTED_MESSAGE = process.env["EXPECTED_MESSAGE"] ?? "Plaintext message";
+const EXPECTED_LOCATIONS = Number.parseInt(
+  process.env["EXPECTED_LOCATIONS"] ?? "1",
+);
+
+function checkStatusPageNotification(n: sarif.Notification) {
+  const expectedMessage = EXPECTED_MESSAGE.trim();
+  if (!n.message.text?.includes(expectedMessage)) {
+    if (n.message.text !== undefined) {
+      core.setFailed(
+        `Expected the status page diagnostic to contain the message '${expectedMessage}', but found '${n.message.text.replaceAll("\n", "\\n")}'.`,
+      );
+    } else {
+      core.setFailed(
+        `Expected the status page diagnostic to contain the message '${expectedMessage}', but found nothing.`,
+      );
+    }
+  }
+
+  const locationCount = n.locations?.length ?? 0;
+  if (locationCount !== EXPECTED_LOCATIONS) {
+    core.setFailed(
+      `Expected the status page diagnostic to have exactly ${EXPECTED_LOCATIONS} location(s), but found ${locationCount}.`,
+    );
+  }
+}
+
+const sarifPath = process.env["SARIF_PATH"];
+
+if (sarifPath === undefined) {
+  throw new Error("The path to a SARIF file must be set in 'SARIF_PATH'.");
+}
+
+const log = JSON.parse(fs.readFileSync(sarifPath, "utf8")) as sarif.Log;
+const run = log.runs[0];
+
+if (run.invocations === undefined) {
+  throw new Error("run.invocations is undefined");
+}
+
+const toolExecutionNotifications =
+  run.invocations[0].toolExecutionNotifications;
+
+if (toolExecutionNotifications === undefined) {
+  throw new Error("toolExecutionNotifications is undefined");
+}
+
+const statusPageNotifications = toolExecutionNotifications.filter(
+  (n) =>
+    n.descriptor?.id === DIAGNOSTIC_ID && n.properties?.visibility?.statusPage,
+);
+if (statusPageNotifications.length !== 1) {
+  core.setFailed(
+    "Expected exactly one status page reporting descriptor for this diagnostic in the " +
+      `'runs[].invocations[].toolExecutionNotifications[]' SARIF property, but found ` +
+      `${statusPageNotifications.length}. All notification reporting descriptors: ` +
+      `${JSON.stringify(toolExecutionNotifications)}.`,
+  );
+}
+checkStatusPageNotification(statusPageNotifications[0]);
+
+const notifications = run.tool.driver.notifications;
+
+if (notifications === undefined) {
+  throw new Error("notifications is undefined");
+}
+
+const diagnosticNotification = notifications.filter(
+  (n) =>
+    n.id === DIAGNOSTIC_ID &&
+    n.name === DIAGNOSTIC_ID &&
+    n.fullDescription?.text === DIAGNOSTIC_NAME,
+);
+if (diagnosticNotification.length !== 1) {
+  core.setFailed(
+    "Expected exactly one notification for this diagnostic in the " +
+      `'runs[].tool.driver.notifications[]' SARIF property, but found ` +
+      `${diagnosticNotification.length}. All notifications: ` +
+      `${JSON.stringify(notifications)}.`,
+  );
+}
+
+core.info("Finished diagnostic export test");

pr-checks/checks/analysis-kinds.yml

@@ -46,7 +46,7 @@ steps:
       post-processed-sarif-path: "${{ runner.temp }}/post-processed"
 
   - name: Upload SARIF files
-    uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+    uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
     with:
       name: |
         analysis-kinds-${{ matrix.os }}-${{ matrix.version }}-${{ matrix.analysis-kinds }}
@@ -54,7 +54,7 @@ steps:
       retention-days: 7
 
   - name: Upload post-processed SARIF
-    uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+    uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
     with:
       name: |
         post-processed-${{ matrix.os }}-${{ matrix.version }}-${{ matrix.analysis-kinds }}

pr-checks/checks/bundle-from-toolcache.yml

@@ -2,30 +2,20 @@ name: "Bundle: From toolcache"
 description: "The CodeQL bundle should be cached within the toolcache"
 versions:
   - toolcache
+installNode: true
 steps:
-  - name: Install @actions/tool-cache
-    run: npm install @actions/tool-cache@3
   - name: Check toolcache contains CodeQL
     continue-on-error: true
-    uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-    with:
-      script: |
-        const toolcache = require('@actions/tool-cache');
-        const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-        if (allCodeqlVersions.length === 0) {
-          throw new Error(`CodeQL could not be found in the toolcache`);
-        }
+    run: |
+      cd ./../action
+      npx tsx ./pr-checks/toolcache.ts installed
+
   - id: setup-codeql
     uses: ./../action/setup-codeql
     with:
       tools: ${{ steps.prepare-test.outputs.tools-url }}
+
   - name: Check CodeQL is installed within the toolcache
-    uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-    with:
-      script: |
-        const toolcache = require('@actions/tool-cache');
-        const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-        console.log(`Found CodeQL versions: ${allCodeqlVersions}`);
-        if (allCodeqlVersions.length === 0) {
-          throw new Error('CodeQL not found in toolcache');
-        }
+    run: |
+      cd ./../action
+      npx tsx ./pr-checks/toolcache.ts installed

pr-checks/checks/bundle-toolcache.yml

@@ -6,47 +6,31 @@ operatingSystems:
   - ubuntu
   - macos
   - windows
+installNode: true
 steps:
   - name: Remove CodeQL from toolcache
-    uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-    with:
-      script: |
-        const fs = require('fs');
-        const path = require('path');
-        const codeqlPath = path.join(process.env['RUNNER_TOOL_CACHE'], 'CodeQL');
-        fs.rmdirSync(codeqlPath, { recursive: true });
-  - name: Install @actions/tool-cache
-    run: npm install @actions/tool-cache@3
+    run: |
+      cd ./../action
+      npx tsx ./pr-checks/toolcache.ts clear
+
   - name: Check toolcache does not contain CodeQL
-    uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-    with:
-      script: |
-        const toolcache = require('@actions/tool-cache');
-        const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-        if (allCodeqlVersions.length !== 0) {
-          throw new Error(`CodeQL should not be found in the toolcache, but found ${allCodeqlVersions}`);
-        }
-        console.log('No versions of CodeQL found in the toolcache');
+    run: |
+      cd ./../action
+      npx tsx ./pr-checks/toolcache.ts absent
+
   - id: init
     uses: ./../action/init
     with:
       # Request multiple languages so this check uses the combined bundle.
       languages: javascript,python
       tools: ${{ steps.prepare-test.outputs.tools-url }}
+
   - uses: ./../action/analyze
     with:
       output: ${{ runner.temp }}/results
       upload-database: false
+
   - name: Check CodeQL is installed within the toolcache
-    uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
-    with:
-      script: |
-        const toolcache = require('@actions/tool-cache');
-        const allCodeqlVersions = toolcache.findAllVersions('CodeQL');
-        console.log(`Found CodeQL versions: ${allCodeqlVersions}`);
-        if (allCodeqlVersions.length === 0) {
-          throw new Error('CodeQL not found in toolcache');
-        }
-        if (allCodeqlVersions.length > 1) {
-          throw new Error('Multiple CodeQL versions found in toolcache');
-        }
+    run: |
+      cd ./../action
+      npx tsx ./pr-checks/toolcache.ts installed -n 1

pr-checks/checks/config-export.yml

@@ -14,7 +14,7 @@ steps:
       output: "${{ runner.temp }}/results"
       upload-database: false
   - name: Upload SARIF
-    uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+    uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
     with:
       name: config-export-${{ matrix.os }}-${{ matrix.version }}.sarif.json
       path: "${{ runner.temp }}/results/javascript.sarif"

pr-checks/checks/diagnostics-export.yml

@@ -5,6 +5,7 @@ versions:
   - nightly-latest
 env:
   CODEQL_ACTION_EXPORT_DIAGNOSTICS: true
+installNode: true
 steps:
   - uses: ./../action/init
     id: init
@@ -27,58 +28,15 @@ steps:
       output: "${{ runner.temp }}/results"
       upload-database: false
   - name: Upload SARIF
-    uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+    uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
     with:
       name: diagnostics-export-${{ matrix.os }}-${{ matrix.version }}.sarif.json
       path: "${{ runner.temp }}/results/javascript.sarif"
       retention-days: 7
+
   - name: Check diagnostics appear in SARIF
-    uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v8.0.0
     env:
       SARIF_PATH: "${{ runner.temp }}/results/javascript.sarif"
-    with:
-      script: |
-        const fs = require('fs');
-
-        function checkStatusPageNotification(n) {
-          const expectedMessage = 'Plaintext message';
-          if (n.message.text !== expectedMessage) {
-            core.setFailed(`Expected the status page diagnostic to have the message '${expectedMessage}', but found '${n.message.text}'.`);
-          }
-          if (n.locations.length !== 1) {
-            core.setFailed(`Expected the status page diagnostic to have exactly 1 location, but found ${n.locations.length}.`);
-          }
-        }
-
-        const sarif = JSON.parse(fs.readFileSync(process.env['SARIF_PATH'], 'utf8'));
-        const run = sarif.runs[0];
-
-        const toolExecutionNotifications = run.invocations[0].toolExecutionNotifications;
-        const statusPageNotifications = toolExecutionNotifications.filter(n =>
-          n.descriptor.id === 'lang/diagnostics/example' && n.properties?.visibility?.statusPage
-        );
-        if (statusPageNotifications.length !== 1) {
-          core.setFailed(
-            'Expected exactly one status page reporting descriptor for this diagnostic in the ' +
-              `'runs[].invocations[].toolExecutionNotifications[]' SARIF property, but found ` +
-              `${statusPageNotifications.length}. All notification reporting descriptors: ` +
-              `${JSON.stringify(toolExecutionNotifications)}.`
-          );
-        }
-        checkStatusPageNotification(statusPageNotifications[0]);
-
-        const notifications = run.tool.driver.notifications;
-        const diagnosticNotification = notifications.filter(n =>
-          n.id === 'lang/diagnostics/example' && n.name === 'lang/diagnostics/example' &&
-            n.fullDescription.text === 'Diagnostic name'
-        );
-        if (diagnosticNotification.length !== 1) {
-          core.setFailed(
-            'Expected exactly one notification for this diagnostic in the ' +
-              `'runs[].tool.driver.notifications[]' SARIF property, but found ` +
-              `${diagnosticNotification.length}. All notifications: ` +
-              `${JSON.stringify(notifications)}.`
-          );
-        }
-
-        core.info('Finished diagnostic export test');
+    run: |
+      cd ../action
+      npx tsx ./pr-checks/check-diagnostics.ts

pr-checks/checks/diagnostics-without-db.yml

@@ -0,0 +1,72 @@
+name: "Diagnostic export without database"
+description: "Tests that temporary diagnostics are correctly included in the failed SARIF."
+versions:
+  # Overridden by the FF in the `init` step below.
+  - linked
+installNode: true
+
+env:
+  # Allow the failed SARIF file to be generated.
+  CODEQL_ACTION_SKIP_GENERATE_FAILED_SARIF: false
+  # But don't actually upload it.
+  CODEQL_ACTION_SKIP_SARIF_UPLOAD: true
+  # Mark telemetry for this workflow so it can be treated separately.
+  CODEQL_ACTION_TESTING_ENVIRONMENT: codeql-action-pr-checks
+
+steps:
+  # We deliberately need to make this step fail before the database is initialised, but after
+  # some diagnostic has been produced. The simplest way to do that right now is to:
+  #
+  # - Produce a diagnostic before the db is initialised by forcing the use of a nightly release
+  #   with the `CODEQL_ACTION_FORCE_NIGHTLY` feature flag.
+  # - Cause `init` to abort because we are attempting to analyse Swift on a non-macOS runner.
+  #
+  - name: Initialise failing analysis
+    id: init
+    uses: ./../action/init
+    continue-on-error: true
+    env:
+      CODEQL_ACTION_FORCE_NIGHTLY: true
+    with:
+      languages: swift
+      tools: ${{ steps.prepare-test.outputs.tools-url }}
+
+  - name: Analyze
+    uses: ./analyze
+    # In a real workflow, this step wouldn't run. Since we used `continue-on-error`
+    # above, we manually disable it with an `if` condition. Having this step is required
+    # for the init post-action because it checks the workflow definition for e.g. the
+    # `category` input. Without this step, that part of the init post-action would fail.
+    if: false
+    with:
+      category: "/test-codeql-version:${{ matrix.version }}"
+
+  - name: Check diagnostics appear on disk
+    env:
+      DIAGNOSTICS_DIR: "${{ runner.temp }}/codeql-action-temp-diagnostics/"
+    run: |
+      cd ../action
+      npx tsx ./pr-checks/diagnostics-without-db.ts
+validationJobs:
+  diagnostics-without-db-validation:
+    checkout: true
+    installNode: true
+    steps:
+      - name: Download workflow artifact
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        with:
+          pattern: test-mode-sarif-*
+          path: sarif
+
+      - name: List artifact contents
+        run: ls -laR ./sarif
+
+      - name: Check diagnostics appear in SARIF
+        env:
+          SARIF_PATH: "./sarif/codeql-failed-run.sarif"
+          DIAGNOSTIC_ID: "codeql-action/forced-nightly-cli"
+          DIAGNOSTIC_NAME: "A nightly release of CodeQL was used"
+          EXPECTED_LOCATIONS: "0"
+          EXPECTED_MESSAGE: |
+            GitHub configured this analysis to use a nightly release of CodeQL to allow you to preview changes from an upcoming release.
+        run: npx tsx ./pr-checks/check-diagnostics.ts

pr-checks/checks/export-file-baseline-information.yml

@@ -11,23 +11,24 @@ installDotNet: true
 env:
   CODEQL_ACTION_SKIP_FILE_COVERAGE_ON_PRS: false
   CODEQL_ACTION_SUBLANGUAGE_FILE_COVERAGE: true
-  # To balance speed and coverage, we analyze only a single language (JavaScript), but use the
-  # combined bundle so we can test that baseline information is reported for each language in the
-  # multi-language source directory.
-  CODEQL_ACTION_PER_LANGUAGE_BUNDLES: false
 steps:
   - uses: ./../action/init
     id: init
     with:
       languages: javascript
       tools: ${{ steps.prepare-test.outputs.tools-url }}
+      # To balance speed and coverage, analyze only JavaScript but use the combined bundle so
+      # baseline information is reported for every language in the multi-language repository. A
+      # custom configuration prevents per-language bundles from being used.
+      config: |
+        paths-ignore: []
   - name: Build code
     run: ./build.sh
   - uses: ./../action/analyze
     with:
       output: "${{ runner.temp }}/results"
   - name: Upload SARIF
-    uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+    uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
     with:
       name: with-baseline-information-${{ matrix.os }}-${{ matrix.version }}.sarif.json
       path: "${{ runner.temp }}/results/javascript.sarif"

pr-checks/checks/job-run-uuid-sarif.yml

@@ -12,7 +12,7 @@ steps:
     with:
       output: "${{ runner.temp }}/results"
   - name: Upload SARIF
-    uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+    uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
     with:
       name: ${{ matrix.os }}-${{ matrix.version }}.sarif.json
       path: "${{ runner.temp }}/results/javascript.sarif"

pr-checks/checks/multi-language-autodetect.yml

@@ -14,7 +14,6 @@ operatingSystems:
       - stable-v2.21.4
       - stable-v2.22.4
 env:
-  CODEQL_ACTION_CLEANUP_TOOLCACHE_BUNDLES: true
   CODEQL_ACTION_RESOLVE_SUPPORTED_LANGUAGES_USING_CLI: true
 installGo: true
 installDotNet: true

pr-checks/checks/per-language-bundle-validation.yml

@@ -1,49 +1,51 @@
 name: Per-language bundles
 description: Validates extraction and analysis using each per-language CodeQL bundle.
-# TODO: Use a released bundle once releases include per-language bundles.
 matrix:
   include:
     - language: actions
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
       # Actions also needs the JavaScript extractor.
       expected-extractors: actions javascript
     - language: cpp
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
       build-mode: manual
       build-command: gcc -o main main.c
     - language: csharp
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
       build-mode: none
     - language: go
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
       build-mode: autobuild
     - language: java
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
       build-mode: none
     - language: javascript
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
     - language: python
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
     - language: ruby
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
     - language: rust
       os: ubuntu-latest
-      version: nightly-latest
+      version: linked
     - language: swift
       os: macos-latest-xlarge
-      version: nightly-latest
+      version: linked
       build-mode: autobuild
-env:
-  CODEQL_ACTION_PER_LANGUAGE_BUNDLES: true
+installNode: true
 steps:
+  - name: Remove CodeQL from toolcache
+    run: |
+      cd ./../action
+      npx tsx ./pr-checks/toolcache.ts clear
   - uses: ./../action/init
     id: init
     with:
@@ -84,9 +86,8 @@ steps:
       CODEQL_PATH: ${{ steps.init.outputs.codeql-path }}
     run: |
       # A bundle that is missing most of its extractors must never be left in the toolcache,
-      # where a later job analyzing a different language could pick it up. The runner image
-      # ships with its own CodeQL in the toolcache, so check where this bundle was extracted to
-      # rather than whether the toolcache contains CodeQL at all.
+      # where a later job analyzing a different language could pick it up. Per-language bundles
+      # must instead be extracted under the runner's temporary directory.
       echo "CodeQL is at $CODEQL_PATH"
       if [[ "$CODEQL_PATH" == "$RUNNER_TOOL_CACHE"/* ]]; then
         echo "::error::The per-language bundle was added to the toolcache at $CODEQL_PATH."

pr-checks/checks/rubocop-multi-language.yml

@@ -5,7 +5,7 @@ versions:
   - default
 steps:
   - name: Set up Ruby
-    uses: ruby/setup-ruby@14594264cd68ce8a2345dd349bc3d138a4ef85c8 # v1.327.0
+    uses: ruby/setup-ruby@651ff0d62c5c79bed6d53ec518387aae20e72c1a # v1.329.0
     with:
       ruby-version: 2.6
   - name: Install Code Scanning integration

pr-checks/checks/submit-sarif-failure.yml

@@ -35,7 +35,9 @@ steps:
     run: exit 1
   - uses: ./analyze
     # In a real workflow, this step wouldn't run. Since we used `continue-on-error`
-    # above, we manually disable it with an `if` condition.
+    # above, we manually disable it with an `if` condition. Having this step is required
+    # for the init post-action because it checks the workflow definition for e.g. the
+    # `category` input. Without this step, that part of the init post-action would fail.
     if: false
     with:
       category: "/test-codeql-version:${{ matrix.version }}"

pr-checks/diagnostics-without-db.ts

@@ -0,0 +1,48 @@
+import * as fs from "fs";
+import * as path from "path";
+
+import * as core from "@actions/core";
+
+import type * as diagnostics from "../src/diagnostics";
+
+const DIAGNOSTIC_ID = "codeql-action/forced-nightly-cli";
+const diagnosticDirectory = process.env["DIAGNOSTICS_DIR"];
+
+if (diagnosticDirectory === undefined) {
+  throw new Error("DIAGNOSTICS_DIR is undefined.");
+}
+
+const paths = fs
+  .readdirSync(diagnosticDirectory, {
+    recursive: true,
+    encoding: "utf-8",
+  })
+  .filter((p) => p.endsWith(".json"));
+
+core.info(`Found ${paths.length} paths in '${diagnosticDirectory}'.`);
+core.info(`Searching for a diagnostic with id '${DIAGNOSTIC_ID}'...`);
+
+let found = false;
+for (const diagnosticPath of paths) {
+  if (path.extname(diagnosticPath) !== ".json") {
+    core.info(`Skipping ${diagnosticPath}.`);
+    continue;
+  }
+  core.info(`Found ${diagnosticPath}.`);
+
+  const contents = JSON.parse(
+    fs.readFileSync(path.resolve(diagnosticDirectory, diagnosticPath), "utf-8"),
+  ) as diagnostics.DiagnosticMessage;
+
+  if (contents.source.id === DIAGNOSTIC_ID) {
+    core.info(
+      `Found '${DIAGNOSTIC_ID}' in '${diagnosticPath}'. Skipping remaining files.`,
+    );
+    found = true;
+    break;
+  }
+}
+
+if (!found) {
+  throw new Error(`Didn't find '${DIAGNOSTIC_ID}' diagnostic.`);
+}

pr-checks/excluded.yml

@@ -20,3 +20,7 @@ is:
   - "Release info"
   - "Upload results"
   - "Update release branch"
+  # These checks are known not to run on every PR (for example, some release
+  # PRs), so requiring them would block the PRs they don't run on.
+  - "github-advanced-security"
+  - "License compliance check"

pr-checks/package.json

@@ -5,6 +5,7 @@
   "dependencies": {
     "@actions/core": "^2.0.3",
     "@actions/github": "^8.0.1",
+    "@actions/tool-cache": "^3.0.1",
     "@octokit/core": "^7.0.8",
     "@octokit/plugin-paginate-rest": ">=16.0.0",
     "@octokit/plugin-rest-endpoint-methods": "^18.0.0",

pr-checks/sync.ts

@@ -90,7 +90,7 @@ interface Specification extends JobSpecification {
   services?: any;
 
   /** Additional jobs to run after the main PR check job. */
-  validationJobs?: Record<string, JobSpecification>;
+  validationJobs?: Record<string, ValidationJobSpecification>;
 
   /** If set, this check is part of a named collection that gets its own caller workflow. */
   collection?: string;
@@ -122,6 +122,10 @@ interface JobSpecification {
   installYq?: boolean;
 }
 
+type ValidationJobSpecification = JobSpecification & {
+  checkout?: boolean;
+};
+
 /** Describes language/framework-specific steps and inputs. */
 interface LanguageSetup {
   specProperty: keyof JobSpecification;
@@ -215,8 +219,8 @@ const languageSetups: LanguageSetups = {
         name: "Install Node.js",
         uses: pinnedUses(
           "actions/setup-node",
-          "820762786026740c76f36085b0efc47a31fe5020",
-          "v7.0.0",
+          "949feb2413d6458794dcd2491c4babbbce0c15c1",
+          "v7.1.0",
         ),
         with: {
           "node-version": defaultLanguageVersions.javascript,
@@ -263,8 +267,8 @@ const languageSetups: LanguageSetups = {
         name: "Install Java",
         uses: pinnedUses(
           "actions/setup-java",
-          "de7274f081f381c8f8158605e0321c36c376e2e6",
-          "v6.0.1",
+          "b843ebf9b913146b38da2eaa7aeddf76074ae1ad",
+          "v6.1.0",
         ),
         with: {
           "java-version": `\${{ inputs.java-version || '${defaultLanguageVersions.java}' }}`,
@@ -462,6 +466,20 @@ function generateJobMatrix(
   return matrix;
 }
 
+/**
+ * Gets the `actions/checkout` step.
+ */
+function getCheckoutStep(): Step {
+  return {
+    name: "Check out repository",
+    uses: pinnedUses(
+      "actions/checkout",
+      "3d3c42e5aac5ba805825da76410c181273ba90b1",
+      "v7.0.1",
+    ),
+  };
+}
+
 /**
  * Retrieves setup steps and additional input definitions based on specific languages or frameworks
  * that are requested by the `checkSpecification`.
@@ -525,20 +543,17 @@ function generateJob(
     ? checkSpecification.useAllPlatformBundle
     : "false";
 
-  // Determine which languages or frameworks have to be installed.
-  const setupInfo = getSetupSteps(checkSpecification);
+  // Kotlin requires a compatible JDK rather than the runner image's default.
+  const setupInfo = getSetupSteps({
+    ...checkSpecification,
+    installJava:
+      checkSpecification.installJava ?? !("container" in checkSpecification),
+  });
   const workflowInputs = setupInfo.inputs;
 
   // Construct the workflow steps needed for this check.
   const steps: Step[] = [
-    {
-      name: "Check out repository",
-      uses: pinnedUses(
-        "actions/checkout",
-        "3d3c42e5aac5ba805825da76410c181273ba90b1",
-        "v7.0.1",
-      ),
-    },
+    getCheckoutStep(),
     ...setupInfo.steps,
     {
       name: "Prepare test",
@@ -609,13 +624,16 @@ function generateJob(
 /** Generates a validation job. */
 function generateValidationJob(
   specDocument: yaml.Document,
-  jobSpecification: JobSpecification,
+  jobSpecification: ValidationJobSpecification,
   checkName: string,
   name: string,
 ) {
   // Determine which languages or frameworks have to be installed.
   const { inputs, steps } = getSetupSteps(jobSpecification);
 
+  // Construct a checkout step if requested.
+  const checkoutStep = jobSpecification.checkout ? [getCheckoutStep()] : [];
+
   // Extract the sequence of steps from the YAML document to persist as much formatting as possible.
   const specSteps = specDocument.getIn([
     "validationJobs",
@@ -624,7 +642,7 @@ function generateValidationJob(
   ]) as yaml.YAMLSeq;
 
   // Add the generated steps in front of the ones from the specification.
-  specSteps.items.unshift(...steps);
+  specSteps.items.unshift(...checkoutStep, ...steps);
 
   const validationJob: Record<string, any> = {
     name: jobSpecification.name,
@@ -635,7 +653,7 @@ function generateValidationJob(
       "security-events": "read",
     },
     "timeout-minutes": 5,
-    "runs-on": "ubuntu-slim",
+    "runs-on": "ubuntu-latest",
     steps: specSteps,
   };
 

pr-checks/toolcache.ts

@@ -0,0 +1,94 @@
+#!/usr/bin/env npx tsx
+
+/**
+ * Provides utility commands for working with the Actions toolcache in PR checks.
+ */
+
+import fs from "fs";
+import { parseArgs } from "node:util";
+import path from "path";
+
+import * as core from "@actions/core";
+import * as toolcache from "@actions/tool-cache";
+
+function removeCodeQLFromToolcache() {
+  const toolcachePath = process.env["RUNNER_TOOL_CACHE"];
+
+  if (toolcachePath === undefined) {
+    throw new Error("Expected RUNNER_TOOL_CACHE to be defined");
+  }
+
+  const codeqlPath = path.join(toolcachePath, "CodeQL");
+  fs.rmSync(codeqlPath, { recursive: true });
+
+  core.info(`Removed '${codeqlPath}' from the toolcache.`);
+}
+
+function findCodeQL() {
+  return toolcache.findAllVersions("CodeQL");
+}
+
+function checkNoCodeQLInToolcache() {
+  const allCodeqlVersions = findCodeQL();
+  if (allCodeqlVersions.length !== 0) {
+    throw new Error(
+      `CodeQL should not be found in the toolcache, but found ${allCodeqlVersions}`,
+    );
+  }
+  core.info("No versions of CodeQL found in the toolcache");
+}
+
+function hasCodeQLInToolcache(expectedNumber?: string) {
+  const expected =
+    expectedNumber !== undefined
+      ? Number.parseInt(expectedNumber, 10)
+      : undefined;
+
+  const allCodeqlVersions = findCodeQL();
+  if (allCodeqlVersions.length === 0) {
+    throw new Error("CodeQL not found in toolcache");
+  }
+
+  core.info(`Found CodeQL versions: ${allCodeqlVersions.join(", ")}`);
+  if (expected !== undefined && allCodeqlVersions.length !== expected) {
+    throw new Error(
+      `Expected ${expected} versions of CodeQL in the toolcache, but found ${allCodeqlVersions.length}`,
+    );
+  }
+}
+
+function main() {
+  const { positionals, values } = parseArgs({
+    options: {
+      // The number of expected versions in the toolcache.
+      "expected-version-count": { type: "string", short: "n" },
+    },
+    allowPositionals: true,
+  });
+
+  if (positionals.length < 1) {
+    throw new Error("Command not specified.");
+  }
+
+  const cmd = positionals[0];
+
+  switch (cmd.trim().toLowerCase()) {
+    case "clear":
+      removeCodeQLFromToolcache();
+      return;
+    case "absent":
+      checkNoCodeQLInToolcache();
+      return;
+    case "installed":
+      hasCodeQLInToolcache(values["expected-version-count"]);
+      return;
+    default:
+      throw new Error(`Unknown command '${cmd}'.`);
+  }
+}
+
+try {
+  main();
+} catch (err) {
+  core.setFailed(err instanceof Error ? err.message : String(err));
+}

src/actions-util.test.ts

@@ -11,7 +11,6 @@ import {
 } from "./actions-util";
 import { computeAutomationID } from "./api-client";
 import { EnvVar } from "./environment";
-import { getRunnerLogger } from "./logging";
 import { RecordingLogger, setupTests } from "./testing-utils";
 import { initializeEnvironment, withTmpDir } from "./util";
 
@@ -238,7 +237,7 @@ test.serial("fixCodeQualityCategory", (t) => {
       GITHUB_EVENT_NAME: "dynamic",
     },
     () => {
-      const logger = getRunnerLogger(true);
+      const logger = new RecordingLogger();
 
       // Categories that should get adjusted.
       t.is(fixCodeQualityCategory(logger, "/language:c#"), "/language:csharp");

src/analyses.test.ts

@@ -15,7 +15,6 @@ import {
   supportedAnalysisKinds,
 } from "./analyses";
 import { EnvVar } from "./environment";
-import { getRunnerLogger } from "./logging";
 import {
   createFeatures,
   RecordingLogger,
@@ -65,7 +64,7 @@ test.serial(
       .withArgs("analysis-kinds")
       .returns("code-scanning,code-quality");
     const result = await getAnalysisKinds(
-      getRunnerLogger(true),
+      new RecordingLogger(),
       features,
       true,
     );
@@ -139,7 +138,7 @@ test.serial(
     const optionalInputStub = sinon.stub(actionsUtil, "getOptionalInput");
     optionalInputStub.withArgs("quality-queries").returns("code-quality");
     const result = await getAnalysisKinds(
-      getRunnerLogger(true),
+      new RecordingLogger(),
       features,
       true,
     );
@@ -155,7 +154,7 @@ test.serial(
     const requiredInputStub = sinon.stub(actionsUtil, "getRequiredInput");
     requiredInputStub.withArgs("analysis-kinds").returns("no-such-thing");
     await t.throwsAsync(
-      getAnalysisKinds(getRunnerLogger(true), features, true),
+      getAnalysisKinds(new RecordingLogger(), features, true),
     );
   },
 );
@@ -181,7 +180,7 @@ for (let i = 0; i < analysisKinds.length; i++) {
             .withArgs("analysis-kinds")
             .returns([analysisKind, otherAnalysis].join(","));
           const result = await getAnalysisKinds(
-            getRunnerLogger(true),
+            new RecordingLogger(),
             features,
             true,
           );
@@ -199,7 +198,7 @@ for (let i = 0; i < analysisKinds.length; i++) {
             .withArgs("analysis-kinds")
             .returns([analysisKind, otherAnalysis].join(","));
           await t.throwsAsync(
-            getAnalysisKinds(getRunnerLogger(true), features, true),
+            getAnalysisKinds(new RecordingLogger(), features, true),
             {
               instanceOf: ConfigurationError,
               message: `${analysisKind} and ${otherAnalysis} cannot be enabled at the same time`,

src/analyze-action.ts

@@ -50,9 +50,8 @@ import {
   StatusReportBase,
 } from "./status-report";
 import {
-  cleanupTrapCaches,
-  TrapCacheCleanupStatusReport,
   uploadTrapCaches,
+  warnIfTrapCacheCleanupEnvVarIsSet,
 } from "./trap-caching";
 import * as uploadLib from "./upload-lib";
 import { UploadResult } from "./upload-lib";
@@ -86,7 +85,6 @@ async function sendStatusReport(
   trapCacheUploadTime: number | undefined,
   dbCreationTimings: DatabaseCreationTimings | undefined,
   didUploadTrapCaches: boolean,
-  trapCacheCleanup: TrapCacheCleanupStatusReport | undefined,
   dependencyCacheResults: DependencyCacheUploadStatusReport | undefined,
   databaseUploadResults: DatabaseUploadResult[],
   logger: Logger,
@@ -107,7 +105,6 @@ async function sendStatusReport(
       ...statusReportBase,
       ...(stats || {}),
       ...(dbCreationTimings || {}),
-      ...(trapCacheCleanup || {}),
       dependency_caching_upload_results: dependencyCacheResults,
       database_upload_results: databaseUploadResults,
     };
@@ -229,8 +226,6 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
     | undefined = undefined;
   let runStats: QueriesStatusReport | undefined = undefined;
   let config: Config | undefined = undefined;
-  let trapCacheCleanupTelemetry: TrapCacheCleanupStatusReport | undefined =
-    undefined;
   let trapCacheUploadTime: number | undefined = undefined;
   let dbCreationTimings: DatabaseCreationTimings | undefined = undefined;
   let didUploadTrapCaches = false;
@@ -278,6 +273,8 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
       );
     }
 
+    warnIfTrapCacheCleanupEnvVarIsSet(action);
+
     const apiDetails = getApiDetails();
     const outputDir = actionsUtil.getRequiredInput("output");
     action.env.export(EnvVar.SARIF_RESULTS_OUTPUT_DIR, outputDir);
@@ -361,6 +358,7 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
       uploadResults = await postProcessAndUploadSarif(
         logger,
         features,
+        config,
         uploadKind,
         checkoutPath,
         outputDir,
@@ -415,13 +413,6 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
     didUploadTrapCaches = await uploadTrapCaches(codeql, config, logger);
     trapCacheUploadTime = performance.now() - trapCacheUploadStartTime;
 
-    // Clean up TRAP caches
-    trapCacheCleanupTelemetry = await cleanupTrapCaches(
-      config,
-      features,
-      logger,
-    );
-
     // Store dependency cache(s) if dependency caching is enabled.
     if (shouldStoreCache(config.dependencyCachingEnabled)) {
       dependencyCacheResults = await uploadDependencyCaches(
@@ -433,8 +424,10 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
     }
 
     // We don't upload results in test mode, so don't wait for processing
-    if (util.isInTestMode()) {
-      logger.debug("In test mode. Waiting for processing is disabled.");
+    if (util.shouldSkipSarifUpload()) {
+      logger.debug(
+        "SARIF upload is disabled and nothing was uploaded, so we do not need to wait for processing to finish.",
+      );
     } else if (
       uploadResults?.[analyses.AnalysisKind.CodeScanning] !== undefined &&
       actionsUtil.getRequiredInput("wait-for-processing") === "true"
@@ -471,7 +464,6 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
       trapCacheUploadTime,
       dbCreationTimings,
       didUploadTrapCaches,
-      trapCacheCleanupTelemetry,
       dependencyCacheResults,
       databaseUploadResults,
       logger,
@@ -494,7 +486,6 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
       trapCacheUploadTime,
       dbCreationTimings,
       didUploadTrapCaches,
-      trapCacheCleanupTelemetry,
       dependencyCacheResults,
       databaseUploadResults,
       logger,
@@ -508,7 +499,6 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
       trapCacheUploadTime,
       dbCreationTimings,
       didUploadTrapCaches,
-      trapCacheCleanupTelemetry,
       dependencyCacheResults,
       databaseUploadResults,
       logger,
@@ -522,7 +512,6 @@ async function run(action: ActionState<["Base", "Logger", "Env", "Actions"]>) {
       trapCacheUploadTime,
       dbCreationTimings,
       didUploadTrapCaches,
-      trapCacheCleanupTelemetry,
       dependencyCacheResults,
       databaseUploadResults,
       logger,

src/analyze.test.ts

@@ -17,12 +17,12 @@ import { defaultSuites } from "./config/db-config";
 import { Feature } from "./feature-flags";
 import * as gitUtils from "./git-utils";
 import { BuiltInLanguage } from "./languages";
-import { getRunnerLogger } from "./logging";
 import {
   setupTests,
   setupActionsVars,
   createFeatures,
   createTestConfig,
+  RecordingLogger,
   callee,
 } from "./testing-utils";
 import * as uploadLib from "./upload-lib";
@@ -195,7 +195,7 @@ test.serial("status report fields", async (t) => {
         undefined,
         codeql,
         config,
-        getRunnerLogger(true),
+        new RecordingLogger(),
         createFeatures([Feature.QaTelemetryEnabled]),
       );
       t.deepEqual(Object.keys(statusReport).sort(), [

src/api-client.test.ts

@@ -8,7 +8,14 @@ import * as actionsUtil from "./actions-util";
 import * as api from "./api-client";
 import { DO_NOT_RETRY_STATUSES } from "./api-client";
 import { ActionsEnvVars, RegistryProxyVars } from "./environment";
-import { callee, getTestEnv, setupTests } from "./testing-utils";
+import { GITHUB_DOTCOM_API_URL, GITHUB_DOTCOM_URL } from "./github";
+import {
+  callee,
+  getTestEnv,
+  RecordingLogger,
+  SAMPLE_DOTCOM_API_DETAILS,
+  setupTests,
+} from "./testing-utils";
 import * as util from "./util";
 
 setupTests(test);
@@ -284,3 +291,87 @@ test("makeProxyRequestOptions - returns fetch with custom proxy", async (t) => {
     githubUtils.defaults.request,
   );
 });
+
+test.serial(
+  "getApiClientWithExternalAuth constructs clients with or without tokens",
+  (t) => {
+    t.notThrows(() => {
+      api.getApiClientWithExternalAuth(SAMPLE_DOTCOM_API_DETAILS);
+      api.getApiClientWithExternalAuth({
+        ...SAMPLE_DOTCOM_API_DETAILS,
+        auth: undefined,
+      });
+    });
+  },
+);
+
+test("getAuthorizationHeaderFor - returns undefined if there's no token", (t) => {
+  const logger = new RecordingLogger();
+
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      { ...SAMPLE_DOTCOM_API_DETAILS, auth: undefined },
+      `${GITHUB_DOTCOM_URL}/github`,
+    ),
+    undefined,
+  );
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      { ...SAMPLE_DOTCOM_API_DETAILS, auth: "" },
+      `${GITHUB_DOTCOM_URL}/github`,
+    ),
+    undefined,
+  );
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      { ...SAMPLE_DOTCOM_API_DETAILS, auth: "    " },
+      `${GITHUB_DOTCOM_URL}/github`,
+    ),
+    undefined,
+  );
+});
+
+test("getAuthorizationHeaderFor - returns header value with token if url is allowed", (t) => {
+  const logger = new RecordingLogger();
+
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      SAMPLE_DOTCOM_API_DETAILS,
+      `${GITHUB_DOTCOM_URL}/github`,
+    ),
+    `token ${SAMPLE_DOTCOM_API_DETAILS.auth}`,
+  );
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      SAMPLE_DOTCOM_API_DETAILS,
+      `${GITHUB_DOTCOM_API_URL}/github`,
+    ),
+    `token ${SAMPLE_DOTCOM_API_DETAILS.auth}`,
+  );
+});
+
+test("getAuthorizationHeaderFor - returns undefined if url is not allowed", (t) => {
+  const logger = new RecordingLogger();
+
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      SAMPLE_DOTCOM_API_DETAILS,
+      `https://localhost/github`,
+    ),
+    undefined,
+  );
+  t.is(
+    api.getAuthorizationHeaderFor(
+      logger,
+      SAMPLE_DOTCOM_API_DETAILS,
+      `https://api.localhost/github`,
+    ),
+    undefined,
+  );
+});